Fuser Maintenance Kit

Fixing Image Problems On HP Laser Printers

There are several picture related issues that can occur. If you want to get monetary savings and repair it yourself this article is for you. Read about the most common picture associated problems that HP Laser Printers have and find out how to resolve them.

Listed below are just a few examples of image associated issues:

Blank, Stable Black, Streaks, Double Pictures, Specks, Lines, Light Print, Darkish Print, Blurred Picture, Flaking / Rubs off

Cartridges: Most of those problems are associated to the toner cartridge. In the event you don’t have another cartridge to test it you possibly can diagnose the problem another way. Put a sheet of paper in tray 1. Run a configuration web page with your hand on the ability switch. When the page reaches halfway, turn the facility off. You may have to do this a pair extra instances to get the timing correct. Now that you've got stopped the paper halfway, fastidiously take away the cartridge and the paper from the machine. Examine it to see if the issue exists earlier than it reached the fuser. If it does then it is in the cartridge, or possibly it might be within the Laser or scanner assembly. If it does not, then you could have a bad fuser assembly. Remove the fuser and inspect it.

Cartridge issues are the most typical cause of picture associated problems. I find more problems with remanufactured cartridges because the producer isn't replacing certain main components that trigger the defects. Be certain they change the drum. Also, search for companies that are ISO 9002/14001 licensed and STMC certified. It will help weed out the undesirable cartridges. To be honest, I have seen a number of OEM cartridges fail. Cartridges fail for several reasons, resembling international objects getting up into the cartridge inflicting lines, streaks and leaking. This can be resolved by being cautious to not take away staple or paper clips in and round machine. You must also have your machine cleaned. Vacuuming all the paper and toner dust can assist decrease this. Keep in mind to solely use a service vacuum that can handle the tiny particle measurement of toner.

Printing a Configuration web page: You will all the time have to print a configuration page, and here are some reasons.

Picture high quality check, Web page rely, Serial variety of machine, Configuration of printer, The last few errors, Jet Direct print server card is installed, Many others…
Key words.

Listed below are just a few instructions on the best way to print out a configuration page.

If you don’t see your model scroll by the menu in your printer and it must be simple to find.

HP LJ-4000/4050/4100

1. Press [Menu] till INFORMATION MENU appears.

2. Press [Item] till PRINT CONFIGURATION appears.

3. Press [Select] to print the Configuration Page.

HP LJ-4200/4250/4300/4350

1. Press (SELECT button) or the MENU button to open the menus.

2. Use (UP ARROW button) or (DOWN ARROW button) to scroll to INFORMATION, and then press the Test button (Select)

3. Use or to scroll to PRINT CONFIGURATION, and then press the examine button.

HP LJ-8000/8100/8150

1. Press MENU till INFORMATION MENU appears.

2. Press ITEM until PRINT CONFIGURATION appears.

3. Press SELECT to print the configuration pages.

Picture issues attributable to the Fuser Meeting: Symptoms are, toner not fusing, streaking, double imaging.

Note: The 4200 collection had an issue with the movie getting ripped. You will note strands of plastic pieces coming out of the exit area. It'll cause as an image defect, streaking and double imaging.

Diagnose: You possibly can diagnose it by operating a configuration page. Rub on the print. Is it flakey? Does the print rub off simple? If it does, it's probably the fuser. Take away and inspect it. You may examine the film or roller. In the event you see any injury replacement is necessary.

Observe: Most fusers on HP Laser Printers are very easy to remove. When you want directions on learn how to remove and install them, I have maintenance package set up procedures on my website on the entrance page. Look under customer menus.

Solution – The fuser is replaced as an assembly. Take away and replace Fuser Meeting

WARNING! Let the Fuser Meeting cool before disassembly.

Concerning Mild Prints:

When you've got changed your cartridge and you still have mild prints or in case you have light print over the entire page, you will have economy mode on. Go to high quality menu and switch off. I might also try the switch roller. This is also simple to switch, look in Maintenance package set up procedure.

One last item: You probably have tried the entire above, there may very well be another problem. This procedure can be troublesome for the common individual to repair. It is cleaning the scanner or laser unit. In case you are in a really dusty setting the mirror inside this meeting may be dirty. When the mirrors accumulate mud on them the image defect is gentle prints.

I hope this text has helped you save some of your hard-earned money. There actually isn't any purpose to spend money when you'll be able to simply clear it your self!

 

About The Author

Ashley has been writing articles on-line for practically 8 years now. Not solely does this writer specialise in Computers and Technology, you can too take a look at his newest web site on the way to convert AVI to MP4 with AVI to MP4 converter which also helps people find the best AVI to MP4 converter on the market.

Lexmark T630 T632 T634 Fuser Maintenance Kit Replacement